Replacing The Fuse; Technical Specifications - EuroLite LED PMC-16x30WCOB RGB Bedienungsanleitung

Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuseholder with a fitting screwdriver from the housing (anti-clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
DMX control channels:
DMX512 connection:
Flash-rate:
Sound-control:
Number of LEDs:
LED type:
Beam angle:
Dimensions (LxWxH):
Weight:
Maximum ambient temperature T
Maximum housing temperature T
Min.distance from flammable surfaces:
Min.distance to lighted object:
Fuse:
Please note: Every information is subject to change without prior notice. 25.04.2012 ©
230 V AC, 50 Hz ~
470 W/480 VA
3/5/48/51
5-pin and 3-pin XLR
20 Hz
via built-in microphone
16
Cluster 30 W, RGB
approx. 60°
180 x 425 x 400 mm
10.5 kg
: 45° C
a
: 65° C
C
0.5 m
0.1 m
F 3 A, 250V
27/27 00069590.DOC, Version 1.0