Menus; Menu Structure - Pce Instruments Dfg 500 Bedienungsanleitung

5

Menus

5.1

Menu structure

The force gauge has a multi-level menu interface. From the home screen, press MENU/ENTER to enter the menu.
Test Setup
Memory
Printing
System
Language
Calibration
Information
Press ZERO/▲ or PEAK/▼ to move the cursor. Then press MENU/ENTER to enter the next menu level. Press
SEND/EXIT to cancel the setting or exit. When entering numbers, press ZERO/▲ to increase the number and press
PEAK/▼ to go to another digit or item.
5.2 Measurement
There are six selectable items in the measurement menu: Unit, Group,Tolerance, Test Mode, Peak Time and Alarm.
5.2.1 Unit
The measuring unit can be selected under this menu. The units available depend on the measurement range. The
following units are available: N, gf, kgf, ozf and lbf.
EN - 18
Unit
Group
Tolerance
Test Mode
Peak Time
Alarm
Storage Mode
Browse all
Browse selected
Delete selected
Delete all
Print recent
Print selected
Print all
Display Mode
Power Off
Backlight
Key Tone
Date / Time
Password
Key Setting
RS232 Baudrate
Default Setting
-
-
-