Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Charger / adaptor
Outputs
Environmental conditions
Dimensions
Weight
3
System description
3. 1
Front side
1) Measuring shaft
2) LC display
3) Keypad
4) USB interface / multifunctional interface
5) Pointed head adaptor
6) Notched head adaptor
7) Chisel head adaptor
8) Flat head adaptor
9) Hook adaptor
10) Extension bar
3.2
LC display
1) Battery icon: battery level or charging status; flashes when battery needs
to be recharged.
2) Tolerance alarm indicator:
and upper limit;
: above upper limit.
3) Direction icon:
tension;
4) Test mode icon: three measurement modes; Track, Peak and Auto Peak.
5) Current measured value
6) Analogue bar: indicates load in relation to whole capacity; when the bar
enters the area enclosed by the dotted line, this indicates an overload.
7) Saving icon: indicates that data are being saved.
8) System time
9) Unit
universal USB/BM charger, input: 110 ... 240 VAC
USB, RS232, setpoint output
Operating conditions: -10 ... 40 °C; 20 ... 80 % RH
Storage conditions: -20 ... +50 °C; 5 ... 95 % RH
184.3 x 93.9 x 35.4 mm
1.05 kg (2.31 lb)
: below lower limit;
: between lower limit
compression.
EN - 15
Werbung
Inhaltsverzeichnis
