Herunterladen Inhalt Inhalt Diese Seite drucken

Stand-Alone Mode; Dimming; Sound Control / Sensitivity; Master / Slave - EuroLite LED UV Gun 60W COB Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

The display shuts off after 30 seconds of inactivity. With the touch of a button it lights up again.
STAND-ALONE-MODE

Dimming

Sound control / Sensitivity

Master / Slave

Flash

DMX MODE

STAND-ALONE MODE

In Stand-Alone Mode, the LED UV Gun 60W COB can be used without a controller. Disconnect the device
from the controller.
Dimming
Press the MODE button until the LED display shows a C.
You can select the desired brightness level via the UP or DOWN buttons (from C-0 to C-9, increasing
brightness / default setting C-9).
Sound control / Sensitivity
Press the MODE button until the LED display shows an S.
You can select the desired sensitivity level via the UP or DOWN buttons (from S-0 to S-9, increasing
sensitivity / default setting S-5).
Master / Slave
The master/slave-operation enables that several devices can be synchronized and controlled by one master-
device.
On the rear panel of the LED UV Gun 60W COB you can find an XLR-jack and an XLR-plug, which can be
used for connecting several devices.
This device then works as master-device and controls the slave-devices, which are to be connected to the
master-device via a stereo shielded cable.
Connect the DMX OUT jack with the DMX IN plug of the next device.
Press the MODE button until the LED display shows SLA. The devices set in this manner can now be
controlled by the master unit.
Flash
Press the MODE button until the LED display shows an F.
You can select the desired flash speed via the UP or DOWN buttons (from F-0 to F-9, increasing speed /
default setting F-5).
DMX MODE
The LED screen allows you to assign the DMX fixture address, which is defined as the first channel from
which the LED UV Bars will respond to the controller.

Addressing

Press the MODE button until the LED screen shows Add. You can now set the desired address via the UP
or DOWN buttons.
Controlling:
After having addressed the device, you may now start operating it via your lighting controller.
21/23
00069528.DOC, Version 1.1

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis