Record Search - SKYTRONIC 351.142 Gebrauchsanleitung

User can enter below website or domain name as per current PC network environment to visit the remote
DVR.
http://public IP: Web port（such as 0080）
http://intranet IP: Web port（such as 0080） （only available at the same LAN）
http://superdvr.3322.org: Web port（such as 0080）
Router's Port Forwarding
Port forwarding is required when you want to access the DVR connected to the router from outside of the
router's network.
1. Input router's IP address from IE-based browser to open the Router configuration interface;
Click [Transmittal rule] option to take you to the port forwarding instructions for your router;
2.
3. Set the corresponding parameters illustrated in Picture 5-11. When server port and web port forwarding the
DVR IP address, user can visit the DVR remotely.
Friendly Reminder: The router's port forwarding interface may be different; however, when entering into
virtual server,
user will always need forward port 8080 and port 9000 of router to IP address of DVR allocated or
automatically captured, and select [All] or [Both] in corresponding protocol column and save the above setting.
Above steps may differ from the router device depending on the manufacturer.

5.3.4 Record Search

Click [Main MenuRecord Search] to enter into the <Record Search> interface shown as Picture 5-13.
 Time Search: In the Video Search screen, user can search for a specific date and time for a record and view it
in Playback mode. This is useful for hunting a specific recording of an incident if you know the date and time it
occurred.
 Date Search: In the Video Search screen, user can search for all the records in a specific date. To execute a
video search, highlight and select the date numeric field， and then click a detailed time quantum of the specific date,
system will start the playback from the first recoding of the time quantum.
 File List: click [File list] button to enter into the [File List] screen shown as Picture 5-14, the video recordings
for the time quantum will appear in the screen. Then highlight the record file and click [Playback] button.
 Playback Mode: You can use the Playback Control bar to operate the Fast Forward (X2, X4, X8 and X16),
Slow play (1/2, 1/4 and 1/8 speed), Play, Pause/Frame, Rewind(X2, X4, X8 and X16). When ending playback, DVR
will return back to previous menu.
And you also can filter the records you want to view by the Channel or record mode based on date/time search.
Picture 5-13 Picture 5-14