Chapter 6 : Web Application Manager - SKYTRONIC 351.142 Gebrauchsanleitung

1、Return main interface; click right key of mouse to enter into pop-up menu;
2、Click <Start cruise> item, and now you can display and the monitoring places as per your previous setting.
Note: Up to 255 preset bits for the DVR can be stored. However, actual preset quantity differs depending on
PTZ performance.
5.7 Record
Enter into Pop-up menu to select the [Record] option. Now you can start manual record function, or you also
can click [Rec.] button on the Front panel or Remote controller to activate manual record. Please stop record
manually once you activate manual record.
5.8 Stop Record
To stop record quickly, please enter into pop-up Menu to select [Stop] option.
Chapter 6
6.1 Plug-ins download and installation
1、Open your web browser and input the IP address and web port of DVR;
2、If your computer is connected to internet, you will be prompted to download and install "ActiveX Control";
3、You may have "Windows Security Alert" that attempts to block this with the windows Firewall. In that case,
click [Unblock] button to continue your installation processing.
4、The Vista and Win7 system user may need to set user authority.
For Vista user, please click <StartSetupControl Panel> to enter into the below Picture:
For Win7 user, please set your user authority as per below pictures.
Reminder: If the plug-in program is not downloaded successfully, please open IE browser and enter into
<ToolInternet optionCustom> and check if your browser's safety level or firewall setting is too advanced.
If you firstly log-in system, you are prompted to download and run "ActiveX Control". You need waiting for
about one minute, please be patient.
If you want to delete old IE webcam at DVR system update, click <StartRun> and input the command
characters: "regsvr32/u HiDvrOcx.ocx.
Web Application Manager
:
WIN7-1
WIN7-2