Language Select; System Information - SKYTRONIC 351.142 Gebrauchsanleitung

<Main Output>: When set to <Main output>, video output will appear in the monitor's screen.
<VGA>: When set to <VGA>, video output will appear in the VGA's screen.
User can hold pressing [Rew] button for 5 second on the front panel to convert output device quickly.
 Poll time: allow you select sequence time between from 5s and 300s.
Click the [Volume] and/or [Margin] options on the right-bottom corner of the Video/Audio screen to adjust the
volume and/or margin respectively. Details please kindly find the Picture 5-41.
And you are allowed to set <video blind> area shown as Picture 5-42 and Picture 5-43.

5.3.7.4 Language Select

Enter into [Language] menu to select the language you want to use on the DVR (shown as Picture 5-44), and
then click [APPLY] button. The selection will be available after system Auto restarts.

5.3.7.5 System Information

Enter into [System Information] menu to view system info, including Device name and type, Software (firmware)
version, IE version and MAC address etc shown as Picture 5-45.
Picture 5-40
Picture 5-42
Picture 5-44
Picture 5-41
Picture 5-43
Picture 5-45