Video Quality; Record Schedule - SKYTRONIC 351.124 Anleitung

5.6 Video Quality

5.7 Record Schedule

Setting the Record Schedule allows you to customize the type of recording
depending on the time of day.
NO-RECORD [ white]: DVR will not record during the time.
NORMAL-RECORD [ red]: DVR will record continuously.
SENSOR-RECORD [S]: DVR will record when sensor or motion is triggered.
In order to activate the record schedule press the [ ] record button when
NOTE:
viewing the cameras. After pressing the [ ] record button if schedule is set to
"NORMAL-RECORD" the DVR will start to record immediately; if the schedule is
set to be "SENSOR-RECORD" the DVR will not start recording until a motion is
detected by the DVR or an installed sensor is triggered.
Video Quality has 4 different settings:
Highest, High, Normal and Low.
The higher the video setting, the
better quality images, however higher
quality images require more hard drive
space.
Press
[SEL]
setting.
The time line indicates 24 hours of a
day based on AM/PM (0 = 12).
Press [▲, ▼, ◄ or ►] button to
select a time point, press [SEL] to modify
the recording mode.
7
User Manual
to change the quality