SKYTRONIC 351.142 Gebrauchsanleitung Seite 33

Click <Basic character> item to allow you set basic network parameters and network type shown as Picture
6-11.
Click <PPPoE> item to allow you enable <PPPoE> protocol and set its user name and password shown as
Picture 6-12.
Click <DDNS> item to allow you enable <DDNS> protocol and set its domain name, user name and password
shown as Picture 6-13.
Click <Email Set> item to allow you set Email enable, alarm sender and receiver's address, SSL and time etc
shown as Picture 6-14.

Device Parameters
<Device Parameters> item include HDD info (Picture 6-15), PTZ (Picture 6-16), 3G network (Picture 6-17) and
Motion parameters (Picture 6-18 and Picture 6-19) etc.
Click <HDD info> and check out current HDD information.
Picture 6-11
Picture 6-12
Picture 6-13
Picture 6-14
Picture 6-15