Renkforce GM106NS LED Bedienungsanleitung Seite 34

Menu overview:
Display Option
Addr 001-512
ChNd 9Ch
11Ch
Shnd Sh 0
Sh 1
Sh 2
Sh 3
Sh 4
SLNd NASt
SL1
SoUn on
oFF
SenS 0-100
PInt YeS
no
tInt YeS
no
Led on
oFF
dISP dISP
dSIP
teSt teSt
teNP tenp
rSet b105
34
Function
Setting the DMX starting address
9-channel DMX operation
11-channel DMX operation
Automatic effect 1
Automatic effect 2
Automatic effect 3
Automatic effect 4
Automatic effect 5
Master mode
Slave mode
Sound-to-light mode activated
Sound-to-light mode deactivated
Setting of the microphone sensitivity in
sound-to-light operation
Rotating movement is inverted
Rotating movement is not inverted
Swivel movement is inverted
Swivel movement is not inverted
Display permanently on
The display switches off after approx.
70 seconds after the last button is pushed.
Display aligned normally
Display alignment turned by 180°
Performing a self-test
Display of internal temperature
Performing a reset
Comment
Sound-to-Light mode must be
switched off.
Precedence over automatic
mode
Reactivation by pushing a but-
ton
for standing assembly
for suspended assembly
The software version is dis-
played during reset