Inhaltsverzeichnis
Werbung
MD2773-AM/FM-Radio-Multi
BELT CLIP
To install, place belt clip into hole in the rear of the unit and slide up until it
locks in place.
To remove, press in the top part of the belt clip and slide downward.
BATTERY INSTALLATION
Batteries need to be replaced when stations are difficult to tune in.
1. Make sure the Belt Clip is removed first.
2. Open the battery compartment door on the rear of the unit by inserting a
small screwdriver, paper clip or similar item into the tab while gently
pushing to remove (see figure below).
3. Insert two (2) "R03" batteries (not included) according to the polarity
diagram. Alkaline batteries (LR03) are recommended for longer playing
time.
4. Close the battery compartment.
- Do not mix different types of batteries (e.g. Alkaline and Carbon-zinc)
or old batteries with fresh ones.
- If the device is not to be used for a long period of time, remove the
batteries. They may leak.
21.08.2003
10:32 Uhr
INSTALLATION
BATTERY PRECAUTIONS
16
Seite 16
+
Werbung
Inhaltsverzeichnis
