Channel Selection - Ground Zero GZDSP 6-8X Anleitung

2
CH SETTING

Channel selection

Clicking the
adjustments simultaneously (Crossover / Slope / Equalizer) for both channels.
Clicking
Clicking
Clicking the
Trying to synchronize (link) two channels, which have already been adjusted separately, will cause
a pop-up warning.
Confirming this with OK will reset all channel wise done previous adjustments. This cannot be
revoke. Therefore, either a separate adjustment is recommended or alternatively the copy-
functions or
-Icon will link the relevant pair of channels allowing function
Simultaneous adjustment of channel A and B
Independent adjustment of channel A and B
will copy the current adjustment of the left channel to the right channel.
will copy the current adjustment of the right channel to the left channel.
-Icon will invert the left and right inputs.
Warning
can be used.
- 12 -