Listening To The Cd Changer - JVC KD-BT1 Bedienungsanleitung

Cautions:
• Avoid using the USB device if it might hinder your safety driving.
• Do not pull out and attach the USB device repeatedly while "File Check" is flashing on the display.
• Do not start the car engine if a USB device is connected.
• Stop play back before disconnecting a USB device.
• This unit may not be able to play the files depending on the type of USB device.
• You cannot connect a computer to the USB input terminal of the unit.
• Make sure all important data has been backed up to avoid losing the data.
• Do not leave a USB device in the car, expose to direct sunlight, or high temperature to avoid deformation or
cause damages to the device.
You can operate the USB device in the same way you operate the files on a disc. (See pages 14 – 16.)
• You can listen to WAV files by following the MP3/WMA/AAC files operations listed on pages 14 – 16.

Listening to the CD changer

Change the display information
and pattern
It is recommended to use a JVC MP3-compatible CD changer with your unit. You can connect a CD changer to the CD
changer jack on the rear of the unit. See also page 32.
• You can only play conventional CDs (including CD Text) and MP3 discs.
Preparation
Make sure "Changer" is selected for the external input setting, see page 38.
~
Select "CD-CH."
Ÿ
Select a disc to start playing.
Press: For selecting disc number 1 – 6.
Hold: For selecting disc number 7 – 12.
24