JVC KD-BT1 Bedienungsanleitung Seite 19

Registration (Pairing) methods
Use either of the following items in the Bluetooth menu
to register and establish the connection with a device.
• Select "Bluetooth Phone" or "Bluetooth Audio" as the
source to operate the Bluetooth menu.
Open Make the unit ready to establish a new
Bluetooth connection.
Connection is established by operating the
Bluetooth device.
Search Make the unit ready to establish a new
Bluetooth connection.
Connection is established by operating
the unit.
• When appears on the display, you can move
back to the previous display by pressing number
button 3.
Registering using "Open"
Preparation
Operate the device to turn on its Bluetooth function.
1
Select "Bluetooth Phone" or "Bluetooth
Audio."
2
Select "New."
• The registered device and "New
Device" (when a new device can be
registered) appear in turn.
3
Enter setting menu.
4
Select "Open."
5
Enter a PIN (Personal Identification
Number) code to the unit.
• You can enter any number you like (1-digit to
16-digit number). [Initial: 0000]
• To enter a PIN code less than 4-digit, press
number button 5 (
PIN code.
* Some devices have their own PIN code. Enter the
specified PIN code to the unit.
1
Move to the next (or previous) number
position.
2
Select a number.
3 1
Repeat steps
entering a PIN code.
4
Confirm the entry.
"Open..." flashes on the display.
6
Use the Bluetooth device to search and
connect.
On the device to be connected, enter the same
PIN code you have just entered for this unit.
"Connected (and device name)" appears on the
display.
Now connection is established and you can use the
device through the unit.
The device remains registered even after you
disconnect the device. Use "Connect" (or activate
"Auto Connect") to connect the same device from
next time. (See pages 18 and 41.)
OPERATIONS
) to delete the initial
2
and until you finish
Continued on the next page
17