JVC KD-G821 Bedienungsanleitung Seite 41

Symptoms
• "Not Support" appears on the display
and track skips.
• "NO MUSIC" appears on the display. Change the disc that contains MP3/WMA tracks.
• Correct characters are not displayed
(e.g. album name).
• Noise is generated.
• "File Check" keeps flashing on the
display.
• "No Files" appears on the display.
• "Not Support" appears on the display
and track skips.
• "Read Failed" appears on the display,
then returns to the previous source.
• Correct characters are not displayed
(e.g. album name).
• While playing a track, sound is
sometimes interrupted.
• "No Disc" appears on the display.
• "No Magazine" appears on the
display.
• "Reset 08" appears on the display.
• "Reset 01" – "Reset 07" appears on
the display.
• The CD changer does not work at all.
Remedies/Causes
Skip to the next track encoded in an appropriate
format or to the next non-copy-protected WMA
track.
This unit can only display letters (capital: A – Z,
small: a – z), numbers, and a limited number of
symbols and special characters (see page 38).
The track played back is not an MP3/WMA track.
Skip to another file. (Do not add the extension
code <.mp3> or <.wma> to non-MP3 or WMA
tracks.)
• Readout time varies depending on the USB
memory.
• Do not use too many hierarchy and folders.
• Turn off the power then on again.
Attach a USB memory that contains tracks
encoded in an appropriate format.
The track is unplayable.
• The attached USB memory may be
malfunctioning, or may not have been
formatted correctly.
The files included in the USB memory are
corrupted.
• Do not pull out or attach the USB memory
repeatedly while "File Check" appears on the
display.
This unit can only display letters (capital: A – Z,
small: a – z), numbers, and a limited number of
symbols and special characters (see page 38).
MP3/WMA tracks have not been properly copied
into the USB memory.
Copy MP3/WMA tracks again into the USB
memory, and try again.
Insert a disc into the magazine.
Insert the magazine.
Connect this unit and the CD changer correctly
and press the reset button of the CD changer.
Press the reset button of the CD changer.
Reset the unit (see page 2).
Continued on next page...
41