Tracing The Same Programme-Alternative Frequency Reception - JVC KD-G821 Bedienungsanleitung

3
Selecting an announcement type.
4
Exit from the setting.
either lights up or flashes on the playback
display.
• If lights up, Announcement Standby
Reception is activated.
• If flashes, Announcement Standby
Reception is not yet activated.
To activate, tune in to another service
providing the related signals.
flashing and remain lit.
To deactivate the Announcement Standby
Reception
Select "Announce Off" in step 2 on page 33.
goes off.
Announcement types
Travel, Warning, News, Weather, Event,
Special, Rad Inf (Radio Information), Sports,
Finance
PTY Standby Reception
PTY Standby Reception allows the unit to
switch temporarily to your favorite programme
type from any source other than AM.
• Operations are exactly the same as explained
on page 11 for FM RDS stations.
• PTY Standby Reception for DAB tuner works
only using a dynamic PTY code.
• You can activate and deactivate PTY Standby
Reception when the source is either "FM" or
"DAB."
34
Tracing the same programme—
Alternative Frequency Reception
You can keep listening to the same programme
by activating the Alternative Frequency
Reception.
• While receiving a DAB service:
When driving in an area where a service
cannot be received, this unit automatically
tunes in to another ensemble or FM RDS
station, broadcasting the same programme.
• While receiving an FM RDS station:
When driving in an area where a DAB service
is broadcasting the same programme as the
FM RDS station is broadcasting, this unit
automatically tunes in to the DAB service.
When shipped from the factory, Alternative
Frequency Reception is activated.
will stop
To deactivate the Alternative Frequency
Reception, see page 22.
To show the Dynamic Label Segment (DLS)
information
While listening to an ensemble that supports
DLS....
Lights up when receiving a service providing Dynamic Label
Segment (DLS)—DAB radio text.
• The DLS display will be temporarily
canceled when you operate the unit.
To show whole text at once, press and hold
DISP while DLS is displayed. Multi-line text
display appears.
• When the text contains more than 64
characters, another window appears to
show the rest of the text.
To restore the previous display, press and
hold DISP again.