Storing Dab Services In Memory - JVC KD-G821 Bedienungsanleitung

2 Select one of the DRC signals levels (1, 2,
or 3).
The reinforcement increases from 1 to 3.
3 Exit from the setting.
appears on the display.
• will be highlighted only when
receiving DRC signals from the tuned
service.
To search for your favorite service
You can search for either Dynamic or Static
PTY codes.
• Operations are exactly the same as explained
on page 10 for FM RDS stations.
• You cannot store PTY codes separately for the
DAB tuner and the FM tuner.
• Search will be performed on the DAB tuner
only.

Storing DAB services in memory

You can preset six DAB services (primary) for
each band.
• When appears on the display, you can
move back to the previous display by pressing
number button 3.
EX.: Storing an ensemble (primary service) into
the preset number 4 of the DAB 1 band.
Using the number buttons
1
32
2
Select an ensemble (primary service).
3
Using the Preset Service List
1
Follow steps and
1
• By holding 5 / ∞, the Preset Service List
will appear (go to step 4).
2
3
Display the Preset Service List.
4
Select a preset number you want to
store into.
• You can move to the lists of the other
DAB bands by pressing number button
5 ( ) or 6 (
you cannot store the selected service into
these bands.
above.
2
) repeatedly, but