JVC GM-P420E Bedienungsanleitung Seite 13

Connections
AV connections
These terminals are not available for GM-P420PCE and GM-P421PCE.
To use them, you need to install video input unit (IF-C422P1G), which is separately purchased.
VCR 1
(used as the playback source)
VIDEO
IN
When connecting another PC to the COMPONENT/RGB B terminals, set the "RGB/COMPO." setting to "RGB"
(see page 23).
Personal computer
(used as the playback
source)
Notes:
• You can connect another VCR or Monitor to the VIDEO A OUT terminal. However, when connecting a VCR to the
VIDEO A terminals, do not connect both IN and OUT terminals to the same VCR.
• When connecting a VCR to the VIDEO B terminals, you can use either the video or S-video terminals. If the both
terminals are used, S-video terminal will have priority.
12
(Continued)
(used as the playback source)
AUDIO VIDEO
L/MONO
R
OUT IN Y/C IN
VIDEO A
To G output
To B output
To R output
To HD/Cs output
To VD output
To audio output
VCR 2
AUDIO
L/MONO
R
Y/G Pb/B
VIDEO B
DVD player, etc
(used as the playback source)
VIDEO AUDIO
L/MONO
R
Pr/R HD/Cs VD
COMPONENT/RGB B