JVC DT-V1910CG Bedienungsanleitung Seite 21

SIZE/POSI. ADJ.
Adjusts the size or position of the picture.
Press the button to
display the setting menu
illustrated on the right.
H.SIZE
Adjusts the horizontal screen size.
• –20 ~ 00 ~ +20 (*)
– : Reduces the screen size horizontally.
+ : Enlarges the screen size horizontally.
* Reduced to 00 ~ +20 during the under-scan mode.
H.POSITION
Adjusts the horizontal screen position.
• –20 ~ 00 ~ +20
– : Move the screen to the left.
+ : Move the screen to the right.
V.SIZE
Adjusts the vertical screen size.
• –20 ~ 00 ~ +20
– : Reduces the screen size vertically.
+ : Enlarges the screen size vertically.
V.POSITION
Adjusts the vertical screen position.
• – 20 ~ 00 ~ + 20
– : Move the screen up.
+ : Move the screen down.
ZOOM V. SIZE
• – 20~00
ZOOM H. SIZE
• – 20~+20
NOTE:
• ZOOM V. SIZE and ZOOM H. SIZE are displayed only when the
ZOOM function is operated. ZOOM V. SIZE adjusts the screen
size vertically, and ZOOM H. SIZE adjusts it horizontally when the
ZOOM is operated.
<SIZE/POSI. ADJ.>
H.SIZE : 00
H.POSITION : 00
V.SIZE : 00
V.POSITION : 00
ZOOM H.SIZE : 00
ZOOM V.SIZE : 00
sub menu
reset
EXIT: ADJUST:- + SELECT:
MENU
DISTORTION ADJ.
Compensates the picture distortion.
Press the button to
display the setting menu
illustrated on the right.
PINCUSHION
Compensates pincushion picture distortion.
• –20 ~ 00 ~ +20
– : Expands both left and right sides of the picture.
+ : Squeezes both left and right sides of the picture.
PIN.BALANCE
Adjusts the compensation balance of the
pincushion picture distortion.
• –20 ~ 00 ~ +20
– : The picture is expanded on the left side, and squeezed on the
right side.
+ : The picture is squeezed on the left side, and expanded on the
right side.
PARALLELOGRAM
Compensates parallelogram picture
distortion.
• –20 ~ 00 ~ +20
– : Moves the upper side of the picture to the right, and the lower
side to the left.
+ : Moves the upper side of the picture to the left, and the lower
side to the right.
TRAPEZOID
Compensates trapezoid picture distortion.
• –20 ~ 00 ~ +20
– : Enlarges the upper side of the picture.
+ : Reduces the upper side of the picture.
ROTATION
Compensates for picture tilt.
• –31 ~ 00 ~ +31
– : Turns the picture clockwise.
+ : Turns the picture counterclockwise.
<DISTORTION ADJ.>
PINCUSHION : 00
PIN.BALANCE : 00
PARALLELOGRAM : 00
TRAPEZOID : 00
ROTATION : 00
sub menu
reset
EXIT: ADJUST:- + SELECT:
MENU
19