Usb Connection; Using The Usb Connector In The Drawer; Using The Supplied Usb Cable - Pioneer AVIC-F3210BT Installationshandbuch

Section
03 Connecting the system

USB connection

Using the USB connector in the
drawer
You can connect either the USB interface
cable for iPod or an appropriate USB storage
device using the USB connector in the drawer.
USB interface cable for iPod (supplied)
= For details, refer to Operation Manual.

Using the supplied USB cable

If the drawer cannot be used due to the dimen-
sions of the iPod or USB storage device, you
can connect them using the USB cable sup-
plied.
1 Unplug the fixed USB cable from the
USB port on the rear.
p When the fixed USB cable on the rear is un-
plugged, the USB connector in the drawer
will not work.
8
Engb
USB connector
2 Connect the supplied USB cable to the
USB port.
USB port
Not used.
1.5 m
USB cable (supplied)
3 Tie together the fixed USB cable and
the supplied USB cable with the twist tie.
Use the twist tie that came around the sup-
plied USB cable to bind the two USB cables
together.
p To prevent the fixed USB cable from becom-
ing entangled by anything at the rear, bind
it to the other USB cable.
Navigation unit