Paging The Parent Unit - Philips Avent SCD565 Benutzerhandbuch

Press the next lullaby button E to select
2
another lullaby from the list.
•
If no lullaby is playing, the last selected
lullaby starts playing when you press the
next lullaby button E.
•
When you press the next lullaby button
E while a lullaby is playing, the next
lullaby starts playing.
To adjust the sound level of the lullaby, press
3
the volume + or the volume - button on the
baby unit.
Note:
D
You can only set the loudspeaker volume on the
baby unit when a lullaby is playing. If you have
set the volume for the lullaby higher on the baby
unit, the sound will also be louder when you use
the talk function on the parent unit.
To stop lullaby playing, press the lullaby play/
4
stop button K on the baby unit.

5.3 Paging the parent unit

If you have lost the parent unit, you can use the
FIND button on the baby unit to locate the
parent unit.
Note:
D
The paging function only works when the parent
unit is switched on.
Press the FIND button on the baby unit.
1
• The message 'PAGING' appears on the
display of the parent unit and the parent
unit produces a paging alert tone.
To stop the paging alert tone, press the FIND
2
button on the baby unit again or press any
button on the parent unit.
Note:
D
The paging alert tone stops automatically after
2 minutes.
9