Philips Avent SCD565 Benutzerhandbuch Seite 12

If you do not connect the parent unit to the
2
mains, the following happens in succession:
1 The link with the baby unit is lost.
2 The display goes out.
3 The parent unit switches off.
Note:
D
If you switch on the parent unit when its rechargeable
batteries are almost empty, the display goes on.
The message 'BATTERY LOW' appears on the display
for 2 seconds before the parent unit switches off.
6.3.3 Charging
Insert the small plug in the parent unit and put
the adapter in a wall socket. When the parent unit
charges, the following happens in succession:
The display goes on for 4 seconds and the
1
text 'CHARGING' appears on the screen for
2 seconds.
The battery status light is solid green when
2
the parent unit is connected to the mains.
The first segment in the battery status
3
indicator starts flashing to indicate that the
rechargeable batteries are charging.
The second segment in the battery status
4
indicator starts flashing when the rechargeable
batteries are charged to more than 30% of
their capacity.
12
The third segment in the battery status
5
indicator starts flashing when the rechargeable
batteries are charged to more than 50% of
their capacity.
When the rechargeable batteries are full,
6
the following happens:
•
The third segment in the battery status
indicator stops flashing.
•
The display goes on for 4 seconds and
the message 'BATT FULL' appears on the
display.
•
The battery status light turns solid green.
Disconnect the parent unit from the mains.
7
It is now ready for cordless use.
Note:
D
You can charge the parent unit when it is switched
off. In that case only the battery status indicator is
visible.
Note:
D
If the rechargeable batteries run low very quickly,
they have reached the end of their life and you
have to replace them. To order new rechargeable
batteries, see chapter 'Ordering accessories'.