Battery Status Light; Functions And Feedback On The Parent Unit; Volume; Setting The Volume Level - Philips Avent SCD565 Benutzerhandbuch

5.4 Battery status light

The battery status light is solid green when
1
the baby unit runs on battery power and the
batteries contain enough energy.
The battery status light flashes red quickly
2
when the batteries run low while the baby
unit is running on battery power.
•
Replace the batteries when they run low.
•
If the batteries run out of power while the
baby unit is running on battery power,
the baby unit switches off and the parent
unit loses connection with the baby unit.
Note:
D
We advise you to use the baby unit on mains
power, as the baby unit has a limited operating
time when you use it on non-rechargeable alkaline
batteries. The operating time on non-rechargeable
batteries is 24 hours.
10
6 Functions and
feedback on the
parent unit

6.1 Volume

The volume can be set if the menu is not active.
There are seven volume levels and a 'volume off'
setting.

6.1.1 Setting the volume level

Press the + button or the - button once.
1
• The current volume level appears on the display.
Press the + button to increase the volume or
2
press the - button to decrease the volume.
• The parent unit beeps at every volume step
• At maximum volume, the parent unit gives
two beeps.
• If no button is pressed for more than
2 seconds, the volume level indication
disappears and the volume setting is saved.
6.1.2 Volume off
Below the lowest volume setting, there is a
'volume off ' setting.
Press the + button or the - button once.
1
• The current volume level appears on the
display.
Press and hold the - button for more than
2
2 seconds to set the volume to off.
• The message 'MUTE' and the mute symbol
appear on the display.