Herunterladen Inhalt Inhalt Diese Seite drucken

Product Overview - Philips Avent SCD501/00 Benutzerhandbuch

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 11
Switched-on mobile phones in the vicinity of
the baby monitor may cause interference with
the baby monitor.
For pluggable equipment, the adapter shall be
installed near the equipment and easily accessible.
2.0.4 Important information about batteries
Always place batteries of the correct type in
the parent unit to avoid the risk of explosion.
The parent unit does not have a charging
function. If you use rechargeable batteries in
the parent unit, recharge them in a battery
charger.
Make sure that your hands are dry when you
insert or replace batteries.
To avoid battery leakage, damage or
explosion:
1
Do not expose the appliance to
temperatures higher than 40°C. Batteries
may explode if exposed to sunshine, fire
or high temperatures.
2
Do not overcharge, short-circuit, reverse
charge or damage batteries.
3
Remove the batteries of the parent unit if
you are not going to use the appliance for
one month or more.
4
Do not leave empty batteries in the
parent unit.
Dispose of non-rechargeable batteries
and rechargeable batteries properly (see
chapter 'Environment').
To protect your skin, wear protective gloves
when you handle damaged or leaking
batteries.
To have a cordless operating time of up to 24
hours, insert batteries with a capacity of 1500
mAh or more in the parent unit.
2.0.5 Compliance with standards
This appliance complies with all applicable
standards and regulations regarding exposure
to electromagnetic fields.
This appliance complies with the radio
interference requirements of the European
Community.
4
4213_355_5006_2_DFU-Redesign_A5_v3.indd 4
Philips Consumer Lifestyle, Tussendiepen 4,
Drachten, Netherlands, hereby declares that
this baby monitor is in compliance with the
essential requirements and other relevant
provisions of Directive 2014/53/EU (DECT:
frequency band 1880-1900 MHz, maximum
radio-frequency power: 250 mW). A copy
of the EC Declaration of Conformity (DoC)
is available online at www.philips.com/
support.

3 Product overview

A Parent unit
1
Sound level lights
2
On/off button 3
3
Volume - button
4
'link' light
5
Socket for small plug of adapter
6
Battery light
7
Volume + button
8
Release button of battery compartment
lid
9
Battery compartment lid
10 Adapter
B Baby unit
1
Nightlight button
2
On/off button 3
3
Power-on light
4
Fixed mains cord
5
Adapter
16/08/17 10:46

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Avent scd502/26Avent scd502Avent scd501

Inhaltsverzeichnis