Product Overview (Fig. 1); First-Time Setup - Philips Avent SCD860/26 Bedienungsanleitung

Product overview (Fig. 1)

1 WiFi status light
2 Infrared lights
3 Baby monitor lens
4 Microphone
5 Viewing indicator
6 Nightlight
7 Foot
8 Nightlight button
9 Lullaby play/pause button
10 Light sensor
11 Temperature and humidity sensor unit
12 Appliance plug socket
13 Reset button
14 On/off button
15 Wall mounting bracket
16 Adapter
17 Appliance plug

First-time setup

Before you start the set-up procedure, make sure:
- You have wireless Internet access (2.4 GHz WiFi).
- You are close enough to the WiFi router to have a good WiFi signal.
- If you use a WiFi repeater, make sure that your router and your WiFi
repeater have the same SSID (the network name) and that you use
the same password for the router and the repeater.
- You have the password of your WiFi network at hand. Always connect the
baby monitor to a secure network (see chapter 'Security and privacy').
- Make sure that your smart device runs on iOS 7 or higher, or
Android 4.1 or higher (for device compatibility, see chapter 'Device
compatibility').
1 Download the Philips Avent uGrow Smart Baby Monitor app from
the App Store or Google Play. Use keywords 'uGrow smart monitor'
or 'Philips smart monitor' to find the app.
2 Launch the app.
ENGLISH
5