Technical Data - HSR DIF 501 Montageanleitung Und Bedienungsanleitung

3

TECHNICAL DATA

Vacuum connection
Main supply
Cooling water
Characteristics
Pump fluid
Roughing pump
General
Wight
1) Without groove for retaining ring
Values measured with mineral oil 66 A according to Pneurop or DIN 28427.
2)
Two-stage rotary vane pumps or pump combinations of one- or two-stage rotary vane pumps
3)
and roots pumps are recommended as roughing pumps.
4) In continuous operation.
10
High vacuum flange: Clamping flange
Fore vacuum flange: Clamping flange
Line voltage
Frequency
Power consumption
Recommended values:
Temperature feeder line
Consumption at temperature of return line
≤ 30°C
Requirement for other temperature
2)
Pumping speed for air
2)
Pumping speed for air
Working range
Fore vacuum stability
Pump fluid filling capacity:
minimum
optimum
maximum
Pump fluid consumption
Recommended pumping speed of the
3)
roughing pump for an operating
4)
pressure :
-4
above 10 mbar
-4
above 10 mbar
Heating time
Cooling time
Materials:
Housing
Jet stream system
Fore vacuum baffle
Cold cap
Seals
PDA501-W / PDB501-W
-4
at 1×10 mbar
-2
at 1×10 mbar
PDA501-W PDB501-W
DIF 501 DIF 501 C
1)
DN 500 ISO-K
DN 100 ISO-K
3×400 / 3×230 VAC
50 ... 60 Hz
7,2 kW (3 × 2,4 kW)
20°C
500 l/h
 page 17
12000 l/s 8500 l/s
15 mbar l/s ..... mbar l/s
10 -7 ... 1×10 -1 mbar
0,5 mbar
3
3000 cm
3
4000 cm
3
5000 cm
5×10 -5 g/mbar l
3
170 ... 500 m /h
3
100 ... 120 m /h
25 min
80 min
Steel
Al
Inox / Al
Copper, nickel plated/Inox
Viton
180 kg
DIF05deHSR (201605)