Control Panel - WolfVision VZ-27plus Bedienungsanleitung

REMOTE
CONTROL:
ZOOM MIRROR
PRESETS IMAGE TURN
1 2 3
A
FOCUS IRIS
AF
LIGHT TEXT EXT / INT ALL
MEMORY
1 2 3
HELP
4 5 6
7 8 9
MENU POWER
CODES
Storing Presets:
Press one of the PRESET-keys (#14) for 2 sec.
Storing Images:
Press one of the MEMORY-keys (#31) for 2 sec. (on the remote control).
By pressing the FREEZE-key (#17) for 2 seconds, the image is stored in the next free memory (1-9). If the memory is
full, a message appears on the screen.
Activating the on-screen menu:
Press the MENU-key (#23) for 1 sec.
One-Push Auto focus:
Press both FOCUS-keys (#19) simultaneously.
Manual change to second lamp:
Press the LIGHT-key (#21) for 2 sec. (on the unit).
Switching the output mode:
Higher mode: Simultaneously press the FREEZE-key (#17) and the MIRROR UP-key (#12) (on the unit)
Lower mode: Simultaneously press the FREEZE-key (#17) and the MIRROR DOWN-key (#12) (on the unit)
Resetting the output mode to the default of "auto resolution":
Simultaneously press the FREEZE-key (#17) and both MIRROR-keys (#12) (on the unit).
Resetting of the Visualizer menu:
For resetting the whole menu simultaneously press the EXT/INT-key (#20) and the MENU-key (#23) (on the unit).
For resetting only the selected item press the NUMBER 5 -key (#31) for 2 sec. (on the remote control) .
Video output (PAL or NTSC):
PAL: Simultaneously press the FREEZE-key (#17) and the Preset 1-key (#14) (on the unit)
NTSC: Simultaneously press the FREEZE-key (#17) and the Preset 2-key (#14) (on the unit).
Filling the memory quickly:
Press the ALL-key (#30) for more than 4 sec. (on the remote control). Then follow the instructions of the on-screen
menu (Press MEMORY 1-key (#31) for snapshot or MEMORY 3-key (#31) to erase the memory).
Change ir-code:
Change the ir-code in the
control too by pressing simultaneously PRESET 1, PRESET 2
control) to switch from code A to B, C, D ... A ...etc. For resetting the remote control to code A simultaneously p
PRESET 1, PRESET 2

CONTROL PANEL:

on-screen menu "Misc. Settings" (code A is default). Change the ir-code on the remote
(#14) and ZOOM WIDE-key
EXT/INT
FREEZE WHITE
A
AF
(#14) and ZOOM TELE-key
(#13) (on the remote control).
16
R
(#13) (on the remote
ress