Reissuing Leckey Products; Product Servicing - Leckey Squiggles Benutzerhandbuch

14 Re-issuing Leckey
Products
Most Leckey products are assessed and
ordered to meet the needs of an individual
user. Before reissuing a product we
recommend that the therapist prescribing the
product has carried out an equipment
compatibility check for the new user and has
ensured that the product being
re-issued contains no modifications
or special attachments.
A detailed technical inspection should be
carried on the product prior to re-issuing.
This should be carried out by a technically
competent person who has been trained
in the use and inspection of the product.
Please refer to section 13 for the required
checks to be carried out.
Ensure the product has been cleaned
thoroughly in accordance with section 11
of this manual.
Ensure a copy of the user manual is supplied
with the product. A copy can be downloaded
from our website www.leckey.com
Leckey recommend that a written record is
maintained of all product inspections carried
out during the reissue of the product.
If in any doubt to the continued safe use
of your Leckey product or if any parts
should fail, please cease using the
product and contact our customer
service department or your local dealer
as soon as possible.

15 Product Servicing

Servicing of all Leckey products should only
be carried out by technically competent
persons who have been trained in the use of
the product.
In the UK & ROI please contact the Leckey
Service Centre on UK 0800 318265 or ROI
1800 626020 and our customer service
department will be delighted to assist you
with your servicing requirements.
All international service enquiries should be
directed to the appropriate Leckey distributor
who will be delighted to assist you. For
further information on Leckey distributors
please visit our website www.leckey.com