Leckey Squiggles Benutzerhandbuch Seite 25

Chassis
To prepare the chassis for the seating system
we recommend that you raise the chassis to a
comfortable working height by pressing the
foot lever shown.
Height adjustment –
Hi Low chassis
You can carry out this adjustment with the
child in the chair. To adjust the height of the Hi
low chassis press the foot lever (A) at the rear
of the chassis whilst holding the push handle
(B). Once you remove your foot from the pedal
the seat will be fixed at the chosen height.
For safety the height adjustment pedal on the
chassis can be locked by engaging the pull
pin (C) on the right hand side of the pedal. To
unlock pull the pin out and rotate 90 degrees,
the pedal can then be operated. The locking
pin (C) should be kept in the locked position
when you are not adjusting the chassis.
Always keep the locking pin engaged when
you are not adjusting the chassis. This will
prevent the foot pedal being operated
accidentially.
A
B
C