Switch Unit On/Off - Endress+Hauser Mini-log b Betriebsanleitung

6. Setting up

6.3 Switch unit on/off

The unit is delivered in a switched off condition.
Switching on:
1. Unscrew unit cover.
2. Open unit cover downwards.
3. Push the on/off switch
4. Check that the display is operational.
5. The unit is switched off by operating the on/off
Attention: Stored data remain stored in the unit even when it is
switched off.
Date and time however do not continue to operate and must be
reset using ReadWin when the unit is switched on again.
= On/off switch
Ê
= Minus terminal (blue)
Ë
= Plus terminal (orange)
Ì
32
on the left side of the unit.
Ê
switch.
Ê