Slave Mode; Sound Active Mode; Dmx Mode - Lightmaxx Platinum Line CLS-3 QUAD Bedienungsanleitung

 Auto Run mode (13 built-in modes together)
FQN01-99 (Frequency adjustable)
 SLAVE Mode:
Link the units and press MODE button of the Slave units to SLAVE mode. Then the slave units will follow running in
accordance with the Master unit.

Sound Active Mode:


Press MODE button into SOUND controlling mode, then the fixture will run via the sound.
Press UP & DOWN to adjust the sound sensitivity levels (SENS00-31) & frequency (FQN01-99).
 DMX Mode
Channel mode: (4CH, 6CH, 7CH, 16CH, 19CH optional)
4CH: Every four spot eyes as 1 section
6CH: Every four spot eyes as 1 section
7CH: Every four spot eyes as 1 section, totally 2 sections
16CH: Every one spot eye as 1 section, totally 4 sections
6 channel mode:
Channel:
1
2
3
4
5
6
4 channel mode:
Channel:
1
2
3
4
Value:
000-255
000-255
000-255
000-255
000-255
000-000
001-005
006-010
011-255
Value:
000-255
000-255
000-255
0000-255
Function:
Red (0-100%)
Green (0-100%)
Blue (0-100%)
Amber (0-100%)
Master dimmer (0-100%)
ON
Sound control (15 colors)
ON
Strobe (increasing)
Function:
Red (0-100%)
Green (0-100%)
Blue (0-100%)
Amber (0-100%)
6