Configuration - AUDIOLINE Compact-S Bedienungsanleitung

Configuration

4 Configuration
All the necessary configurations for the telephone are made via the application software used or your operating
system.
If this is not done automatically, please carry out the following steps.
The names of the various menu options and buttons may vary slightly according to the different operating
systems, e.g. Sounds and Audio Devices = Multimedia. The steps for installation, however, are identical.
Configuring the USB telephone
Open the USB Wideband Phone Settings dialogue. Make your selections from the General Options, Audio Settings,
Tone Settings or About menus. Select the settings you require. Click on the Apply button and then OK to apply the
settings and close the pulldown menu.
Configuring Skype™
Open the Skype™ application.
Select Tools, Options and then Sounds and Audio Devices.
Select your USB Telephone from the Devices pulldown menu. Complete this process for both the Audio In as well as
the Audio Out features.
Click on the Save button to apply the settings and close the pulldown menu.
We recommend a test call to the Skypet test service.
Refer to the instructions in your application software for further, more detailed information.
GB
24
Service−Hotline Germany: Tel. 0180 5 001388 (cost via Telekom at time of going to print: 14 ct/min)