AEG Smart 64 Handbuch Seite 6

6
Micro USB / Charging Port
• Connect your handset to your computer to transfer
12
• Connect a 5V DC micro-USB socket AC Adaptor to
4.3 Inserting the Handset Battery (See P2)
To access the battery compartment, carefully remove the cover by
lifting from the small cut-out in the bottom corner as shown, Then
insert the battery into position and replace the cover.
4.4 Charge the Handset Battery (See P3)
When using your S64 Android Smart Home Phone for the frst
time, connect the supplied power cord to the handset or stand the
handset in a charger pod (if supplied), and charge for at least 6
hours.
• Means the battery is still charging.
• Means the battery is fully charged.
4.5 Connect the Power Cable and Telephone Line Cord (See P4)
1. Plug the end of the power cable into Power Line In, and the mains
adapter plug into a mains power socket.
2. Plug one end of the phone cable into Phone Line In, and the other
end into a telephone wall socket.
1 Register Button
Press and hold this to register a new handset to the base.
2 Power Line In
Connect to the micro-USB plug of the base power adaptor.
3 Phone Line In
Plug your phone line into this socket.
files.
charge the phone.