Removing A Handset - Topcom butler 2900c MULTI HANDSET Gebrauchsanweisung

Topcom Butler 2900C
• Enter the number of the base unit you would like to subscribe the
handset to (1-4)
• The unit will start searching for the base and when found it will ask to
enter the pin code (4 digits):
• Enter the base pin code (0000). If the pin is wrong, the handset will
restart the searching for the base.
• When the handset is registered, it will show 'HS' followed by the
handset number.

5.2 REMOVING A HANDSET

You can remove a handset from a base to allow another handset to be
registered:
• Press and hold the mute
• Enter the pin code (0000). If the pin is wrong, the handset will go
back to standby.
• Enter the handset number (1-5) you want to remove
• The unit will go back to standby is the removal is successfully. If not,
it will ask again to enter the handset number
Remark: You can only remove existing handsets and others
then the one you are using
Topcom Butler 2900C
and redial key
PIN
PIN 1234
for 3 sec.
H5-
9