Removing A Handset; Selecting A Base Unit; Using Multiple Handsets - Topcom butler 930 big button Bedienungsanleitung

Each handset can be subscribed to 4 different DECT base units. Each
base unit is assigned a number from '1' to '4' in the handset. When
you subscribe a new handset, you can assign a base unit number. It
is best to use '1'.

13.2 Removing a handset

It is possible to cancel subscription of a handset to a base. You should do this if a handset is
damaged and has to be replaced by a new one.
You can only cancel subscription of another handset, not the
handset you are using to do the remove procedure.
• Press the left 'Menu' key.
• Press the up or down key
• Press 'Select' to confirm.
• Press the up or down key
• Press 'Select' to confirm.
• Enter the PIN code and press 'OK'.
• Use the up or down key
handset or a non-existing handset, a warning tone will be heard.
• Press 'Select' 13

13.3 Selecting a base unit

If your handset is subscribed to several base unit stations (max. 4), you must select a base
unit because the handset can only communicate with one base unit at a time.
• Press the left 'Menu' key.
• Press the up or down key
• Press 'Select' to confirm.
• Press the up or down key repeatedly until 'Select Base' is selected.
• Press 'Select' to confirm.
• Use the up or down key
existing base, a warning tone will be heard.
• The display will show 'Selected BSx'. Press the 'Select' key to confirm.
Caution: Before you can select a base unit, the handset must be
subscribed to the base first.

13.4 Using multiple handsets

These functions are only possible when more than one handset is
subscribed to the base.
13.4.1 Calling another handset
• Press the internal call key
• 'Intercom 1 2 3 4 5" appears on the display.
• Dial the number of the handset you would like to call.
• After finishing your call, press the on hook key
Butler 930
/
15 7
/
7
15
/
15 7
to confirm your selection or press 'Back'
/
15 7
/
to select the base. If you select the current a non-
15 7
14 .
repeatedly until 'BS Settings' is selected.
repeatedly until 'Terminate HS' is selected.
to select the handset. If you select the current
repeatedly until 'HS Settings' is selected.
6
to hang up.
Butler 930
5 to leave the menu.
23