- Using the Telephone Keypad - Skype
7.4
Using the telephone keypad with Skypet
Caution: In order to use these functions, it is essential to have
installed the drivers provided on the CD supplied.
Information on this drivers is provided in Chapter 6 "Drivers" and
Chapter 5.2.2 "Activating the magnetic hook contact, piezoelectric
sound generator and other functions".
7.4.1 Entering a number manually
S
Lift the receiver. The Skypetwindow appears on the PC screen.
S
Enter the relevant phone number using the telephone keypad.
S
Press the Call button
connection to the number dialled.
7.4.2 Incoming calls
Incoming calls are indicated visually and/or acoustically according the settings
defined.
S
Lift the receiver.
or
S
Press the Call button
7.4.3 Ending calls
S
To end a call, press the On-Hook button
or
S
replace the receiver.
7.4.4 Muting function
S
To deactivate the microphone (muting), press the Mute button
the telephone keypad. The red LED lights up.
»
on the telephone keypad to establish the
»
on the telephone keypad to take the call.
º
on the receiver
-
t
ç
on
103