D) Enabling/Disabling The Alarm; Snooze Function; Timer Function - Renkforce RT-1923 Retro-Plattenspieler Bedienungsanleitung

• When the turntable is in standby mode (the STANDBY LED (16) must be on), press and hold the TIMER/SLEEP
button (13) until "ON TIME" flashes on the LCD display (15). The clock symbol will be displayed and the hour value
for the alarm time will start to flash.
• Turn the TUNING/SKIP wheel (8) to set the hour value. Press the TIMER/SLEEP button (13) to confirm your
selection. The minute value for the alarm time will start to flash.
• Turn the TUNING/SKIP wheel (8) to set the minute value. Press the TIMER/SLEEP button (13) to confirm your
selection. "TIME OFF" will be displayed. You can now configure the power off time. The hour value for the power off
time will start to flash on the LCD display (15).
• Turn the TUNING/SKIP wheel (8) to set the hour value. Press the TIMER/SLEEP button (13) to confirm your
selection. The minute value for the power off time will start to flash on the LCD display (15).
• Turn the TUNING/SKIP wheel (8) to set the minute value. Press the TIMER/SLEEP button (13) to confirm your
selection. The playback source will start to flash on the LCD display (15).
• Turn the TUNING/SKIP wheel (8) to choose the playback source. "TUNER", "CD" or "USB" will be displayed. Press
the TIMER/SLEEP button (13) to confirm your selection. The volume will start to flash on the LCD display (15).
• Turn the TUNING/SKIP wheel (8) to adjust the volume. Press the TIMER/SLEEP button (13) to confirm your
selection.
• Once you have finished configuring the alarm, the programmed settings will be displayed again in a loop.
Unplug your headphones before the alarm goes off, otherwise the sound will not be played through
the built-in speaker.

d) Enabling/disabling the alarm

• A clock symbol will be displayed on the LCD display (15) when the alarm is enabled.
• Press the TIMER/SLEEP button (13) to enable or disable the alarm. When you enable the alarm, the alarm settings
will be displayed one by one (including the playback source and volume).
e) Snooze function
• Press the OP/CL/SNOOZE button on the remote control to snooze for 10 minutes when the alarm goes off.
"SNOOZE" will appear on the LCD display (15).
• The alarm will go off again after 9–10 minutes. This cycle can be repeated numerous times within a one-hour period.
f) Timer function
• Press the STANDBY/VOLUME wheel (24) to turn the turntable on. The STANDBY LED (16) will turn off.
• You can now control the turntable as usual.
• To switch the turntable off automatically at a preset time, keep pressing the TIMER/SLEEP button (13) until the
desired timer duration is displayed.
• You choose from 10–90 minutes in 10 minute intervals. The turntable will automatically switch to standby mode
when the preset time has elapsed. The display will then revert to normal and "SLEEP" will be displayed.
• To disable the timer before the preset time has elapsed, keep pressing the TIMER/SLEEP button (13) until "SLEEP"
is no longer displayed (set the timer duration to 0 minutes).
39