Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OBJ_BUCH-2419-003.book Page 13 Thursday, February 11, 2016 9:51 AM
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-15.
Typically the A-weighted noise levels of the product are:
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection!
Vibration total values a
(triax vector sum) and uncertainty K
h
determined according to EN 60745-2-15:
Vibration emission value a
h
Uncertainty K
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical data" is in conformity with all rele-
vant provisions of the directives 2011/65/EU, until 19 April
2016: 2004/108/EC, from 20 April 2016 on: 2014/30/EU,
2006/42/EC, 2000/14/EC including their amendments and
complies with the following standards: EN 60745-1,
EN 60745-2-15, EN 50581.
2000/14/EC: Guaranteed sound power level:
Conformity assessment procedure according to Annex V.
Equipment category: 25
Technical file (2006/42/EC, 2000/14/EC) at:
Bosch Lawn and Garden Ltd., PT-HG/ENS-PA2,
Stowmarket, Suffolk IP14 1EY, England
Henk Becker
Helmut Heinzelmann
Executive Vice President
Head of Product Certification
Engineering
PT/ETM9
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
Leinfelden, 11.02.2016
Bosch Power Tools
3 600 J12 000 3 600 J12 001 3 600 J12 002
dB(A)
83
dB(A)
103
dB
=1.24
2
m/s
1.9
2
m/s
=1.5
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
3 600 J12 000 3 600 J12 001 3 600 J12 002
dB(A)
104
Mounting and Operation
The numbering of the figures refer to the illustrations of the
machine on the graphics page.
Action
Delivery Scope
Inserting the Battery
Removing the Battery
Switching On and Off
Working Advice
Handle Rotation
Lubrication
Selecting Accessories
English | 13
82
84
102
103.7
=2
=2.6
2.0
2.2
=1.5
=1.5
104
106
Figure
Page
1
91
2
91
3
91
4
92
5
92
6
92
7
93
8
93
F 016 L81 090 | (11.2.16)
Werbung
Inhaltsverzeichnis
