Siemens SIMEAS P Betriebsanleitung Seite 60

Dielectric test, routine test, 2 s
Voltage inputs, binary outputs
Current inputs
Power supply
Serial interface
Additional for I/O modules
Binary inputs and binary/relay
outputs to PG
Analog inputs and analog outputs
to PG
Insulation type of inputs and outputs
Signal inputs (current)
Signal inputs (voltage)
Power supply
Output contacts
according to IEC 61010-1
AC: 2.2 kV
AC: 1.35 kV
DC: 3.1 kV
AC: 500 V
AC: 2.2 kV
AC: 500 V
Reinforced,
AC: max. 150 V, Cat III
Protective impedance,
AC: max. 600 V, Cat II or
AC: max. 300 V, Cat III
Reinforced,
AC: max. 230 V,
DC: max. 250 V,
Cat II
Reinforced,
AC: max. 230 V,
DC: max. 250 V,
Cat II
58