Siemens SIMEAS P Betriebsanleitung Seite 56

Measured values
Apparent energy
Unbalance voltage
Unbalance current
THD voltage
THD current
Harmonic voltage U
5. 7. 11. 13. 17. 19. H.
Harmonic current I
5. 7. 11. 13. 17. 19. H.
Limit violations
Analog inputs
Binary inputs
1) Phases are displayed based on the type of connection.
2) Tolerances are applicable from 0.5 to 1.2 times nominal value.
3) Average value of all phases.
4) Measuring beginning with 2 % of the apparent power in selected
measurement range
5) Measuring beginning with 30 % of the input voltage L1-N
Measured values can be displayed on measured value screens
d
Measured values selectable over communication
a
Measured values selectable for list screens and oscilloscope
h
Measuring
Menu
1
path
d a
L1, L2, L3, Σ
Four-wire
d a h
system
Four-wire
d a h
system
L1, L2, L3 d a h
L1, L2, L3 d a h
L1, L2, L3
d a h
L1, L2, L3 d a h
counter 1
d a
to 4
external d a
external d a
54
2
Tolerances
±0.5 %
±0.5 %
±0.5 %
±0.5 %
±0.5 %
±0.5 %