Specifications - Ryobi EMS180RV Bedienungsanleitung

GB
FR DE ES
DESCRIPTION
1. On/off switch
2. Dust collection box
3. Variable speed control selector
4. Live tool indicator
5. Triangular detail pad
6. Sheet pad
7. Triangular detail sanding sheet
8. Non-adhesive sandpaper
9. Quick change hook and loop pad
10. Cover
11. Finger pad
12. Lock
13. Hex key
14. Paper clamp
SPECIFIC SAFETY INSTRUCTIONS FOR
SANDERS
Always wear safety goggles and a dust mask when
sanding, especially sanding over-head.
The machine is not suitable for wet sanding.
Do not use sanding paper larger than needed.
Extra paper extending beyond the sanding pad can
also cause serious lacerations.
The dust collection box shall be equipped with the
tool. It should be emptied frequently. To connect
dust collection box, insert the adapter of dust box to
the dust-collection opening on the rear end of the
sander.
Do not throw sanding dust on an open ¿ re because
materials in ¿ ne particle form may be explosive.
A suitable breathing respirator must be worn while
sanding lead paint, some woods and metal to avoid
breathing the harmful/toxic dust or air.

SPECIFICATIONS

Voltage
Power
Orbital minute
Pad size
Triangular pad
IT NL PT DK SE
WARNING
WARNING
230 V - 240 V
180 W
6000-12000 min -1
168 x 100 mm
FI NO RU PL CZ
English
1/3 Sheet pad
Weight
FEATURES
KNOW YOUR POWER TOOL
See Figure 1.
Your sander is suitable for sanding with coarse, medium
and ¿ ne grit sandpaper. It will produce a ¿ ne, scratch free
¿ nish when used to sand with the grain on wood surfaces.
It has been designed so that À ush corner sanding on three
sides of the sander is possible.
Your sander has a comfortable palm grip handle that
provides maximum one-hand comfort and reduces
operator fatigue during continuous sanding operations.
Before using this product, familiarize yourself with all
operating features and safety requirements. However, do
not let familiarity with the tool make you careless.
SWITCH
This tool is equipped with a simple switch control located
near the front of the motor housing.
EXCHANGEABLE HOOK AND LOOP BASE PADS
This sander
interchangeable for different applications.
triangular detail pad for detail sanding
1/3 sheet pad for sanding large areas
The hook and loop design allows for quick change of
sanding sheets and different pads. It also enables you to
easily clean and reuse them.
CIRCULAR SANDING ACTION
The oscillating action of your sander produces very quick,
small circular motion of the sanding pad. The motion is
ideal for producing a ¿ ne ¿ nished grain.
DUST COLLECTION BOX
The dust collection box attaches to the sander and keeps
dust to a minimum.
VARIABLE SPEED
See Figure 4.
50 Hz
Your sander has advanced electronic features, designed
to assist you in getting the maximum use from your
sander. By making proper speed selections, your tool can
be adjusted to speci¿ c sanding needs.
The electronic feature of your tool introduces the À exibility
of adjusting the motor speed to required job conditions. An
electronic speed control module senses the load applied
to the motor and increases or decreases motor voltage to
1
HU RO LV LT EE
185 x 92 mm
1.4 kg
includes 2 base
HR SI SK GR TR
pads which are