Setting The Clock - Difrnce R200 Anleitung

Setting the clock

1. Press the SELECT button. (Note: if you make a mistake at any point, press the BACK button go
back to the previous screen.)
2. Turn the knob until the display says <Configure>
3. Press the SELECT button.
4. Turn the knob until the display says <Clock>.
5. Turn the knob until the display says <Set Time>.
6. Press the SELECT button.
7. Turn the knob until the hour setting is correct, then press the SELECT button.
8. Turn the knob until the minute setting is correct, then press the SELECT button.
The display says Time Set with the new time shown beneath for 3 seconds, then returns to the
26
Stations
< Configure
Media Player
Register
< Clock
Sleep Time
< Set Time
Set Alarm
Set Time
14:30
Set Time
15:03
Time Set
15:06
>
>
>