Step 3 - Connect To The Wireless Network - Difrnce R200 Anleitung

If it can't find one then the display will say:
If this happens then you will have to get your wireless access point working – see the instructions
supplied with it.
When the radio finds your wireless network, it displays the ESSID for the access point on the
screen – this is a name that is allocated to the access point by the person who set up the network –
for example:
It is possible, and in some locations highly likely, that your radio will find more than one wireless
access point, in which case you can choose which one you want to connect to. Turn the knob on
the radio to see the ESSID each access point the radio has found.
Step 3 – Connect to the wireless network
When the ESSID for the access point you want to is displayed on the screen, press the SELECT
button. If your network is not configured to need an encryption code, the screen should say:
14
No networks
Found
< My Home Network >
Connecting to network