Internet Radio Quickstart Guide; What You Need Before You Can Use Your Internet Radio - Difrnce R200 Anleitung

Internet Radio Quickstart Guide

What you need before you can use your Internet radio

Before you can use your Inter radio, you need the following:
* A broadband Internet connection.
* A wireless access point (Wi-Fi) connected to your broadband Internet, preferably via a router.
* If your wireless network is configured to use Wired Equivalent Privacy (WEP) or Wi-Fi protected
Access (WPA) data encryption then you need to know the WPA code so you can get the Internet
radio to communicate with the network.
* If your wireless network is configured for trusted stations you will need to enter the radio's MAC
address into your wireless access point. To find the radio's MAC address use menu items as
follows: Configure->Network Config->View Config->MAC Address
* To enter the MAC address into your wireless access point, you must read the instructions
supplied with the wireless access point.
The Internet radio should work anywhere within 100 meters of the wireless access point.
Before you continue, make sure that your wireless access point is powered up and connected to
your broadband Internet. To get this part of the system working you must read the instructions
supplied with the wireless access point.
9