Locating And Playing Media Files Using The Radio And Upnp - Difrnce R200 Anleitung

Locating and playing media files using the radio and UPnP

1. Once the UPnP server is configured to share media files with the Internet radio, you can play
the files by doing the following on the radio:
2. Keep pressing BACK to get to the radio's top-level menu and then turn the knob to select
'Media Player'.
3. Press SELECT and then turn the knob to highlight ' UPNP Servers'.
4. Press SELECT and the radio will scan for all available UPnP servers. Note , this may take a few
seconds for the radio complete its scan and before the seam has completed, the radio will
display '(Empty)'. The radio will continue to display '(Empty)' if no UPnP servers are found.
5. After a successful scan, select your UPnP server, by rotating the knob if there is more than one
UPnP server, and than press SELET.
6. At this stage, your radio should be listed in Windows Media Connect and can be viewed from
the 'Devices' pane: your radio will be displayed with its MAC address. To verify that the MAC
address listed is your radio, select 'Configure' on your radio's menu and then turn the knob until
'MAC Address' is selected to view your radio's MAC address.
7. The radio will now list the media categories available from the UPnP server, e.g. 'Music',
'Playlists' etc. Turn the knob to select which category you wish to browse, press SELECT and
turn the knob to highlight a sub category and press SELECT again. For example, you could
select 'Music' and then 'Album'
8. Turn the knob to highlight the media files that you wish to play and press SELECT.
17