Troubleshooting; Technical Specifications - Reloop MIXAGEController Edition Bedienungsanleitung

7.3 TROUBLESHOOTING

If any problem should arise while using Reloop Mixage the following chart is the first drop-in center:
Symptoms
The device does not
receive any power when
turning it on via the ON/
OFF Button -B41-.
The controller's LEDs are
only weakly lit and the
device does not react.
The DJ software does
not show any reaction to
the usage of any of the
contoller's control ele-
ments.
A problem occurs that is
not listed in this chart.

7.4 TECHNICAL SPECIFICATIONS

The following specifications are not verified by Global Distribution GmbH in terms of plausibility and
accuracy:
Power Supply: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DC6V, 1.5A (9W)
Dimensions: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 370 x 61 x 261 mm
Weight:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.4kg (without USB and RCA cable)
34
Possible Causes
USB cord or mains ad-
apter are not connected
correctly.
The power supply is not
sufficient.
Traktor LE is not configu-
red corectly.
Traktor Pro is not ins-
talled correctly.
MIDI channel is not selec-
ted correctly.
Various causes.
Corrective Measures
Check whether the USB cord is connec-
ted correctly to a free USB port of your
computer and Mixage's USB port -B42-.
Please also check whether the mains
adapter is connected correctly to the
mains connection -B40-.
Connect your computer to a secured
power line. Also it is necessary to con-
nect the included mains adapter to the
corresponding jack -B40-.
If you use the included Traktor LE versi-
on, start the Setup Wizard again. Refer
to the paragraph „Traktor LE Setup" in
the chapter „Computer Configuration".
When using Traktor Pro the mapping
has to be loaded again. To do so follow
the instructions in the paragraph „Trak-
tor Pro Configuration" in the chapter
„Computer Configuration".
Check the MIDI Channel Switch -B43-
and put it in the right position (ch. 1 or
ch. 2). Please refer to the paragraph
„MIDI Channel Assignment", chapter
„Device Settings & Tests".
Visit www.reloopdj.com/forum, in order
to get support regarding your Reloop
products.