Reloop MIXAGEController Edition Bedienungsanleitung Seite 27

Element Function
T4 Autoloop Button
Sets an automatic loop with the set loop length
(-T15-), without the necessity of setting the
loop ending point manually.
T5 Loop Length -/+ Dial
By turning the encoder the set loop's length
can be varied.
By pressing the encoder the loop active func-
tion can be activated and deactivated respec-
tively.
T6 Gain Dial
Preamplification of a track/deck.
T7 Pitchfader incl. Status LED
Herewith it is possible to exactly adjust the
pitchfader of the current deck. In 0% position
the LED is illuminated.
T8 Reloop Button
Jumps to the last stored loop and reactivates
it.
T9 FX Select Button
By pressing the button it is possible to scroll
through the effects.
T10 FX-Dry/Wet+Dial
Herewith it is possible to quickly change the
effect's intensity.
T11 Amount (FX Parameter 1) Dial
In Effect Mode the parameters can be adjusted
herewith.
NOTE!
In Traktor LE only the 1st parameter works in
Chained Effect Mode.
T12 FX On Button
Activates the FX section corresponding to the
deck.
T13 Search Mode Button
Allows quick scrolling through a loaded track.
T14 Scratch Mode Button
Activates the jog wheel's scratch function and
the pitch bend function at the edge of the jog
wheel.
T15 Jog Wheel
Herewith various functions can be controlled.
Please also see jog wheel mode buttons -T13- &
-T14-.
T16 Sync Button
The current deck's pitch will be synchronized
to the master deck.
T17 Cup Button
As long as this button is being pressed the
deck jumps to the last set cue point and stops.
When releasing the button playback will start.
T18 Cue Button
Herewith the cue point will be triggered and
played for as long as the button is being held.
Function with activated Shift -T3-
Loop In / Set Cue Button
Manually sets the starting point of
a loop. Simultaneously a cue point
will be defined.
Beat Move Dial
Carries out a beatjump in or oppo-
sed to playback direction.
Loop Out Button
Manually sets the ending point
of a loop. Now the deck is in loop
mode; the selected passage will
be repeated continuously. Rene-
wed pressing stops the loop mode.
Master Deck Assignment
The current deck becomes the
master deck.
Pan Dial
Herewith it is possible to adjust
the volume separation between
the left and right channel. The
zero position corresponds to an
equal level on both channels.
Filter
Regulates the filter effect for the
activated deck. In zero position
the filter will automatically be
deactivated.
Keylock Button
(De-)activates Keylock.
Cue 1 Button
Sets and triggers the 1st cue
point.
Cue 2 Button
Sets and triggers the 2nd cue
point.
Cue 3 Button
Sets and triggers the 3rd cue
point.
27