Overview - Connections; How To Use; Operation; Selecting The Type Of Connection - Silvercrest SSB 36 B2 Bedienungsanleitung

BB58B6RXQGEDUB%ERRN 6HLWH  )UHLWDJ  $SULO    

5.3 Overview - Connections

CAUTION: make sure that the soundbar and the devices
to be connected are switched off before you connect them.
Please also read the user instructions for the devices which
you are connecting.
NOTE: the HDMI (ARC)|8 connection is only able to func-
tion if all components are ARC-enabled. If necessary, old
HDMI cables must be replaced with new ARC-enabled
ones.
Input Use
Connection with ste-
AUX reo cinch cable|12,
IN|10 e.g. television set,
CD player
Connection with 3.5
mm stereo jack ca-
LINE IN|6
ble, e.g. MP3 play-
er, telephone
Connection with
HDMI (ARC) cable,
HDMI e. g. to the HDMI-
(ARC)|8 ARC connection of
the television set, DVD
player
Radio connection,
Bluetooth
e.g. smartphone
• A subwoofer can be connected to the cinch socket of
the SUB OUT|7 output. This is automatically con-
trolled by the device.

5.4 How to use

NOTE: the device remains in standby mode after being
switched off. In this mode, the power consumption of the
device is low. Pull the power unit|11 out of the wall socket
to disconnect it from the mains.
• Connect the power unit|11 with an easily accessible
wall socket. The red LED|1 on the device lights up. The
device is now in standby mode.
36 GB

6. Operation

NOTES:
• All adjustments can be conveniently carried out with
the remote control. The basic functions can also be car-
ried out with the buttons on the device. Operation of
the device in the instructions is usually described with
the remote control.
• If you use the HDMI (ARC)|8 connection, the sound-
bar is usually switched on and off via the remote con-
trol of the connected device. The connected device
must support this function.
Remote
LED
• The device switches into the standby mode, ...
control but-
colour
... if no Bluetooth connection is established within
ton
... if it does not receive a signal for 20 minutes.
AUX|18 white
• Press the POWER
from standby mode.
• Press the POWER
into standby operation.
LINE IN|27 green

6.1 Selecting the type of connection

1. Press one of the AUX|18, LINE IN|27, HDMI
HDMI
(ARC)|17 or
yellow
(ARC)|17
connection (see "Overview - Connections" on
page 36).
2. On the audio device you can now start playback and
select and control the music tracks.
blue
|15

6.2 Sound settings

NOTES:
• Changes to the sound settings are acknowledged with
brief flashing of the LED|1 until the minimum/maxi-
mum value is reached.
• A level control of the treble sounds and basses is only
possible with the setting "Music".
Controlling the volume
• During play, press the VOL –/+|20 buttons on the re-
mote control or VOL –/+|4 on the device. For a faster
change of the volume, you can also keep the buttons
pressed.
Muting the device
1. Press MUTE|16 to switch off the sound. The LED|1
flashes.
2. To switch the sound back on, press MUTE again or
one of the VOL –/+|20 /|4 buttons. The LED|1 lights
up.
20 minutes or
button|28 to switch on the device
button|28 to switch the device
buttons|15 to switch to the desired