Dolby Atmos; Demo Mode; Hdmi Connection - Grundig DSB 2000 Bedienungsanleitung

CONNECTION __________________________
Dolby Atmos ®
Dolby Atmos gives you amazing experience you
have never before by overhead sound, and all
the richness, clarity, and power of Dolby sound.
For using Dolby Atmos ®
1. Dolby Atmos ® is available only in HDMI mode.
For the details of the connection, please refer
to "HDMI CONNECTION".
To use Dolby Atmos ® in HDMI 1 and HDMI 2
mode, your TV has to support Dolby Atmos ® .
2. Make sure that "No Encoding" is selected for
bitstream in the audio output of the connec-
ted external device (e.g. Blu-ray DVD player,
TV etc.).
3. While entering Dolby Atmos / Dolby Digital /
PCM format, the soundbar will show DOLBY
ATMOS / DOLBY AUDIO / PCM AUDIO.
Tips:
• The full Dolby Atmos experience is only availa-
ble when the Soundbar is connected to the
source via a HDMI 2.0 cable.
• The Soundbar will still function when con-
nected via other methods (such as a Digital
Optical cable) but these are unable to support
all of the Dolby features. Given this, our recom-
mendation is to connect via HDMI, in order to
ensure full Dolby support.

Demo mode:

In standby mode, Long press (VOL +) and (VOL
-) button on soundbar at the same time. The
soundbar will power on and demo sound can be
activated. The demo sound will play around 20
seconds.
Note:
1. When demo sound be activated, you can press
button to mute it.
2. If you want to listen the demo sound longer,
you can press to repeat the demo sound.
3. Press (VOL +) or (VOL -) to increase or decre-
ase the demo sound volume level.
4. Press button to exit demo mode and the
unit will go to standby mode.

HDMI Connection

Some 4K HDR TVs require the HDMI input or pic-
ture settings to be set for HDR content reception.
For further setup details on HDR display, please
refer to the instruction manual of your TV.
Using HDMI to connect the soundbar, AV equip-
ment and TV:
Method 1: ARC (Audio Return Channel)
The ARC (Audio Return Channel) function allows
you to send audio from your ARC- compliant TV
to your sound bar through a single HDMI con-
nection. To enjoy the ARC function, please ensu-
re your TV is both HDMI-CEC and ARC compliant
and set up accordingly. When correctly set up,
you can use your TV remote control to adjust the
volume output (VOL +/- and MUTE) of the sound
bar.
• Connect the HDMI cable ( included ) from
unit's HDMI (ARC) socket to the HDMI (ARC)
socket on your ARC compliant TV. Then press
the remote control to select HDMI ARC.
Tips:
• Your TV must support the HDMI-CEC and ARC
function. HDMI-CEC and ARC must be set to
On.
• The setting method of HDMI-CEC and ARC
may differ depending on the TV. For de-
tails about ARC function, please refer to the
owner's manual.
• Only HDMI 1.4 or higher version cable can
support the ARC function.
• Your TV digital sound output S/PDIF mode set-
ting must be PCM or Dolby Digital
• Connection could be failed due to using so-
ckets other than HDMI ARC while using the
ARC function. Make sure the Soundbar is con-
ENGLISH 33