Other Faults - Edesa L3126 Handbuch

• Why can't I see water in the drum?
• Why is water coming out of the drawer?
• Why can't I open the porthole door immediately after the wash ends?

• Other faults

This could be because the washing machine has a sys-
tem that allows it to adapt to the laundry load and the
type of material, adjusting the water level and the energy
used with a view to preserving the environment. This
means that during the wash process, although the
amount of water you can see through the porthole door
may seem low, there is no need to worry. The wash and
rinse will be highly efficient.
Perhaps the drawer or dispenser needs cleaning. This
simple operation is described in Maintaining and clea-
ning the machine;
1- Cleaning the detergent drawer; page 21.
Modern washing machines are equipped with safety sys-
tems to protect users. One of these is that it is not possible
to open the washing machine until the drum has come to a
complete halt. That is why it takes about 2 minutes before
you can open the porthole door.
– The washing machine is able to detect other faults.
When this happens, all the displays for the various
wash stages will flash or different errors will appear on
the display, F05, F06......,F10.
– These faults may be due to very diverse causes.
– Solution: call the OFFICIAL TECHNICAL SUPPORT
SERVICE